Guide · 5 min read
Semi-Truck Preventive Maintenance Schedule by Mileage
A practical PM schedule for Class 8 trucks: oil and filters, air filters, air dryer, DEF filter, coolant, valve adjustment, fluids, DPF and the annual DOT inspection.
Updated November 16, 2026 · by the SyncFleet team
Key takeaways
- Base intervals on your engine maker's recommendations and your duty cycle.
- Common starting points: oil and filters every 25,000 miles, valve adjustment around 250,000, DPF cleaning around 300,000.
- The annual DOT inspection is required at least every 12 months (49 CFR 396.17).
- Track by real odometer miles and remind before service is due.
Preventive maintenance (PM) keeps trucks out of the shop for unplanned repairs and out of trouble at roadside inspections. The right intervals depend on your engine maker, oil type and duty cycle (long haul, regional, stop-and-go), so treat this schedule as a starting point and adjust it to your manuals.
A starting PM schedule
| Service | Typical interval | Notes |
|---|---|---|
| Oil and filters (PM), incl. fuel filters | 25,000 mi | Many OEMs allow longer with synthetic oil and oil analysis |
| Chassis lube (grease) | With each PM | |
| Cabin air filter | 50,000 mi or 12 months | |
| Engine air filter | 100,000 mi or 12 months | Sooner in dusty conditions; watch the restriction gauge |
| Air dryer cartridge | 100,000 mi or 12 months | |
| Coolant test and extender | 150,000 mi or 12 months | |
| DEF filter | 200,000 mi | |
| Valve adjustment | 250,000 mi | Some engines need the first adjustment earlier |
| Transmission fluid | 250,000 mi | Depends on transmission and fluid |
| Axle (differential) fluid | 250,000 mi | |
| DPF cleaning | 300,000 mi | Earlier with frequent regens or idling |
| Annual DOT inspection | Every 12 months | Required by 49 CFR 396.17 |
Make the schedule work
- Track real miles. Telematics odometer readings beat estimates.
- Remind before it's due, for example at 2,000 and 1,000 miles left, so the PM fits the next home time.
- Log every service with the odometer and date, so the next interval starts from the right number.
- Use pre-trip inspections to catch the things between PMs: tires, lights, leaks.
SyncFleet's truck maintenance tracking uses these intervals by default, counts from real odometer miles and reminds each truck's group before service is due.
Frequently asked questions
How often should a semi truck get an oil change?
Many fleets start at 25,000 miles. Your engine maker's recommendation, oil type, oil analysis and duty cycle can move it up or down.
How often is a DOT annual inspection required?
At least once every 12 months for each commercial motor vehicle (49 CFR 396.17).
When is a valve adjustment due?
Often around 250,000 miles, but some engines call for an earlier first adjustment. Check your engine manual.
This guide is general information, not legal advice. Rules change; check the linked FMCSA regulations and your state for your operation.
How SyncFleet helpsTruck Maintenance Tracking & PM Reminders by MileageMore guides
- Driver Qualification File Checklist (49 CFR 391.51)
- Hours of Service Rules Explained: 11, 14, 70 and 34
- Pre-Trip Inspection Checklist & DVIR Rules for Truckers
- Detention Pay in Trucking: How to Track It and Get Paid
- IFTA Quarterly Filing: What Trucking Companies Need
- MCS-150 Biennial Update: Deadlines and How to File
See it with your own trucks.
Click around the demo with sample data, or start free and connect Samsara, Motive, Geotab, Alvys or your ELD in minutes.